Slimbank Tri-18 Colour Wash is a broad wash light with 18 tri-colour LEDs. It effortlessly integrates into conventional lighting setups with its built-in dimming curves. The absence of a fan makes it perfect for environments where noise is a concern.
It comes with removable barn doors that can shield light from undesired areas and limit the spread of the light wash.
These colour wash lights are remarkably bright, reducing the number of lights required for the space. We suggest using one light every 5-6 meters, depending on the desired look you wish to achieve.
Size
39.5cm (L) x 5.5cm (W) x 26cm (H)
Weight
3.6Kg
Extra Product Information
- DMX Channels: 3, 5, 9 or 13
- DMX Connectors: 3-pin XLR
- Light Source: 18 LEDs (Tri-Color RGB) 3 W (1050 mA), 50,000 hours life expectancy
- Strobe Rate: 0 to 22 Hz
- PWM Frequency: 1.2 kHz
- Beam Angle: 17°
- Field Angle: 32°
- Illuminance: 4,120 lux @ 2 m
- Power Linking: 24 units @ 230 V
- Input Voltage: 240 VAC, 50 Hz
- Power and Current: 51 W, 0.3 A @ 230 V, 50 Hz
How do I get the best effect out of this light?
To get the best effect from this light we suggest that you make the room you are using it in as dark as possible. The darker the room the better the effect will be.
How many lights will I need?
This is always a tricky question and it comes down to a few things. Alot will depend on how big an area you want to cover, your budget and what other lights you are planning to have on in the room. Colour of the walls can also make a difference and if your walls are white you will usually need less lighting as it will reflect the light better and the lights will seem brighter. Some people will do up lighting all around the whole reception venue and some people will just do one wall as a feature such as behind the bridal table. Depending on the venue we usually suggest one light every 5 to 6 metre’s for best effect.
How much power do I need?
Alot will depend on how many lights you wish to use but as these lights are led you can run at least 10 from one power point.
What is required to make this light work?
All you are required to do is plug into power and switch on. If you are having a preset colour we will set it for you. If you wish for all lights to do a slow colour change, all lights will need to be connected together so that they will change in sync.
